Press "Enter" to skip to content

Posts tagged as “XDR”

再谈苹果XDR显示器与HDR之殇

我之前有一篇文章聊过苹果的MBP的XDR显示器,以及为什么“正确”调色过的SDR在它上面效果如此之好,以至于连HDR都黯然失色。Why SDR looks so good on Apple’s XDR display that even shadows HDR?

其实很简单:苹果的XDR显示器把普通的SDR内容HDR化了,高光部分没动,只是把暗部压暗了很多,接近5档!

一谈HDR,很多人上来就吹什么动态元数据什么的。抛开色彩不谈,HDR的字面意思就是高动态范围,就是指内容最终在显示设备上呈现时最亮的地方和最暗的地方的比值,能超过一个数值(比如10档/1024)就可以称为HDR了,物理学就是这么简单。

XDR显示器在呈现Rec. 709 (Gamma 2.22)的内容时,IRE 50%~100%时和标准曲线基本吻合。但在50%以下的部分,对比度会慢慢增加,低于10%之后,黑化愈发明显。播放有损压缩视频时,暗部色块和断层基本不可见,显示效果大幅提升,正所谓一黑遮百丑。谁叫人家能黑的下去呢!标准的Rec. 709曲线在最大亮度500nit时,1% IRE的亮度为1.11nit,动态范围8.8档。但在XDR显示器上,实测100% IRE 450nit, 1% IRE 0.04 nit,动态范围13.5档,这还不算HDR吗?

Rec. 709在普通LCD显示器和XDR显示器上的暗部区别巨大(相机直拍)

后记

XDR的MBP发布已经近4年了,现在最新的iPhone/iPad以及安卓阵营在SDR最大亮度上早已超过了它,达到1000nit或以上,至少14档的显示动态范围使得SDR被HDR化有过之无不及。最高2000nit的激发亮度使得HDR的高光也就比SDR多1档,食之无味弃之可惜,普及遥遥无期~此时JPEG说我真的还能再活500年!

Why SDR looks so good on Apple’s XDR display that even shadows HDR?

Apple released their Apple Sillicon based Macbook Pro in October 26, 2021 which includes a new MicroLED display which they call XDR with a peak brightness of 1600 nits. Three years later, it’s still one of the best display for both SDR and HDR content consuming and creation. However, SDR content looks so good on the new XDR displays, sometime I even think that they were HDR content. Why is that? Let us figure out together.

Presets

The new XDR display includes a few presets:

  • Apple XDR Display (P3-1600 nits)

The default one for daily usage which has a peak brightness of 1600 nits for HDR content and 500 nits for SDR / UI.

  • Apple Display (P3-500 nits)

Peek brightness of 500 nits.

  • HDR Video (P3-ST 2084)

HDR reference mode. Can not adjust the brightness which peaks at ~1000 nits for HDR content and ~100 nits for SDR content / UI.

  • HDTV Video (BT.709 – BT.1886)

SDR reference mode. Can not adjust the brightness which peaks at ~100 nits for all content and UI.

500 nits for SDR?

Apple has been using 500 nits for SDR / UI for a very long time. Wait, shouldn’t SDR be 100 nits max? Yes, in theory and in some reference modes. Morden displays have a peak brightness of 300+ nits, not to mention the latest M4 iPad Pro that has a peak brightness of 1000 nits for SDR!!! In today’s standard, 100 nits is too dark to watch even in normally lit indoor environment.

Let’s see how Apple displays SDR content in their XDR displays:

Setup: I created a video with a black square and incrased IRE value of it until it becomes white in Rec. 709 colorspace / gamma. Then used a SM208 screen luminance meter to measure the brightness of the XDR display under different presets.

Here’re curves of screen brightness v.s Rec. 709 IRE values:

After the test, I found that Apple XDR Display (P3-1600 nits) and Apple Display (P3-500 nits) have the same response curve for SDR content, so only drew one line here. They (the red curve) peaked around 450 nits, close to claimed 500 nits (my screen might be degraded a bit after two and half years), middle gray (~40% IRE) is aboud 77 nits, black (0% IRE) is 0.05 nits.

In SDR reference mode (HDTV BT.709-BT.1886 preset), the blue curve, peek brightness is 94 nits, very close to the 100 nits for SDR. Middle gray is a little bit darker at 11 nits, black (0% IRE) is all the way down to 0.02 nits!

I also plot a Gamma 2.4 curve for a 100 nits reference monitor (the yellow curve), you can see that it overlaps well with the SDR reference mode for bright part (60%+ IRE), it lays in between of two modes, its dark region (<1 IRE%) is brighter than both modes and will be even brighter on a real CRT monitor that the SDR standard was designed for.

For comparison, I also measured my BenQ PD3200U which still looks great for most of the SDR content. In sRGB mode, it peaks at 350 nits, the 1% IRE signial is clearly visible and measured at 0.91 nits, pure black is 0.34 nits, contrast ratio is just over 1000:1, no true black is the major drawback of LCD displays. XDR is brighter for the highlights and darker in the shadows.

The curve itself explains why properly graded SDR (Rec. 709) content looks so good in Apple’s XDR Displays: it tracks the gamma curve pretty well for the most part (30%+ IRE), pure white is very bright (450+ nits), and pure black is very dark (0.05 nits), the constrat ratio is around 9000:1 (13+ stops dynamic range).

What about HDR?

I did a similar test for HDR, using ITU-R BT.2100 (HLG) gamma. Here’re the results:

Let’s first look at the HDR reference mode (HDR Video P3-ST2048 preset), the yellow curve, it tracks the HLG curve very well, it’s a straight line (in log scale) after 50% IRE. HDR reference mode peaks at 881 nits (100% IRE), diffuse white 183 nits (75% IRE), both are a little bit darker than the reference values which is 1000 nits and 203 nits respectfully, middle gray is accurate though, around 26 nits (38% IRE), black is 0.02 nits! (0% IRE), It gives us a contrast ratio of ~44000:1, 15 stops+ dyanmic range.

The XDR mode (red curve) is always brighter comparing to the HDR reference mode: 2+ stops in black and deep shadows (0 ~ 10% IRE), 1+ stops (10% ~ 85% IRE) for most of the part and < 1 stops for highlights (85%+ IRE), it curved / saturated after 95% IRE, and peeked at 1450 nits! (100% IRE) , diffuse white 410 nits (75% IRE), close to white in SDR/UI (which is 450 nits), middle gray is around 68 nits (38% IRE), a little bit darker than SDR mode, black is 0.03 nits (0% IRE). It gives us a contrast ratio of ~50000:1, also 15 stops+ dyanmic range.

HLG as a backward compatible curve, I also tested the Apply Display 500 nits mode (the blue curve), it lays between XDR and HDR reference mode for the most of the part and clipped after 90% IRE with a peek brightness of 450 nits (same for SDR content), diffuse white is 219 nits (75% IRE), middle gray is 38 nits (38% IRE) and black is 0.04 nits (0% IRE).

PQ is another story

The HDR reference mode tracks the PQ curve perfectly, it’s a straight line from 0 to 1000 nits and clipped after that.

Both 1600-nits and 500-nits mode didn’t do a good job, they are one stop brighter for shadows and then gradually curved.

Conclusion

Apple’s XDR Display is fantastic, very good in SDR mode: 450+ nits peak brightness, true blacks, 13+ stops of dyanmic range put a lot of “HDR displays” to a shame. You can definitly call it HDR since 100-nits-max, 200:1 constrat ratio SDR is dead for many years. HDR content in XDR mode is also great with a peak brightness of 1450+ nits, 15+ stops dynamic range. However, highlights is only 1.7 stops brighter than UI/SDR white. Idealy, highlights should be at least 3 stops brighter than diffuse white, since people is alreay used to have 500 nits for UI/SDR white, then a 4000+ nits peak brightness display is needed. Setting diffuse white to 203 nits (recommended for HLG masted at 1000 nits), the requirement drops to 1600 nits (it’s not a coincidence), however, (diffuse) white will looks gray since it’s 1.3 stop darker than UI.

I know it’s xxx nits everywhere since human eyes are much more sensitive in luminance than in colors and a lot of “HDR” content are way over saturated!